 | Approvals: | CB, CE, C-Tick, ETL, FCC, IC, ICASA |
| Safety and Emissions: | IEC 62368-1:2014
EN 62368-1:2014 + A11:2017
UL/CSA 62368-1:2014
EN 301 489-1 V2.1.1
EN 301 489-17 V3.2.0
EN 300 328 V2.2.2
EN 50130-4:2011 + A1:2014
EN 62311
FCC 47CFR Part 15 subpart B and subpart C
ISED RSS-247 and ICES-003
AS/NZS 4268 |
| Power supply: | 8-24 VDC or Power over Ethernet (PoE) |
 | Dimension: | 82 mm x 82 mm x 37 mm (H x W x D) |
 | Required power supply: | PoE: IEEE 802.3af compliant class 1 Powered device (PD) External Power supply: The power supply shall be able to deliver minimum 1.2W. The power supply shall be 3 A over current protected. |
 | Radio standard: | IEEE 802.15.4 (2400 – 2483,5MHz), 16 channels (11-26) |
| Encryption (radio communication): | AES 128 bits |
| Receiver sensitivity: | -100 dBm |
| Wireless operating range: | Typical range of 25m depending on building enviroments |
 | Internal antenna: | 2 cross polarized dipoles |
| External antenna: | One reverse polarity SMA external antenna connector. AH40 is certified to be used with ASSA ABLOY external antenna AH-ANTENNA-1. If other external antenna is used it must be of same type (dipole) and not have larger antenna gain than 3.6 dBi. |
 | Class of protection: | IP 20 |
| Operating temperature range: | 5°C to 35°C |
| Relative humidity: | < 95% (non-condensing) |
 | Status: | LED (red/green/orange) |
